Moveable Vessel Reactors
As an alternate to the fixed
head designs described on the
previous page, all Parr reactors
can be furnished in designs
which allow the entire vessel
to be removed as a complete
assembly from the support stand
allowing for charging, product
recovery, and cleaning. In the
smaller and mid-sized models
the entire vessel is simply lifted
out of the heater by hand. In the
larger 1, 2, 5 gallon, and 10 liter
models the vessel can be opened
and closed with the cylinder
remaining in the heater, but the
head must be lifted out by hand.
In the larger 5 gallon and 10 liter
models a chain hoist is provided
for lifting the heavier head and
cylinder.
These moveable reactors will
be attractive to users that intend
to operate fairly simple batch
systems rather than continuous
flow arrangements, and that
want to be able to remove the
vessel for product recovery,
charging or cleaning. They will
also appeal to those that need to
prepare the vessel in a special
atmosphere, or want to clean
the cylinder and stirrer at a site
away from the reactor stand and
heater. There is also the added
advantage of being less expen-
sive than the fixed head models
since they do not require the
more elaborate head or the cylin-
der and heater lift mechanism.
600 mL High Pressure Moveable Vessel
for use to 5000 psi.
4544 Reactor, 600 mL, Moveable Vessel, Quick-release Split Ring, and a 4848 Controller shown with optional
Expansion Modules.
1
21
P a r r I n s t r u m e n t C o m p a n y
1 - 8 0 0 - 8 7 2 - 7 7 2 0
D e s i g n F e a t u r e s
